The Stationary Pollutant Emission Standard has promulgated since April 10, 1992. The emission standard and control guidelines had only little modified during those years. Based on the completeness of stack test and inventory of emission database, the maturity of technology of pollution control technology and the enhancement of the environmental concepts from industrials and public. It is necessary to revise the Stationary Pollutant Emission Standard. The objectives of this project are to review the existing Stationary Pollutant Emission Standard, to collect the Stationary Pollutant Emission Standard of the other country, to formulate the drafted newly Stationary Pollutant Emission Standard and to evaluate the impact of the drafted new Stationary Pollutant Emission Standard. The suggestion of the newly Stationary Pollutant Emission Standard for SOx, NOx and particulate are as follows: The SOx concentration is influenced by the sulfur content of fuel. It was recommended that the sulfur content should not exceeded 0.5% and eliminated the guideline of error value. The existing of NOx standard had distinguished between the existing and newly installed facilities. According to the same baseline of sulfur content of fuel in the near future, it is recommended that all of the emission standard should adopted to the newly installed. The existing particulate standard was calculated by different exhaust volume. It is recommended that the emission standards of particulate will be referred that the exhaust volume exceeds 100Nm3/min, the standards will be 50mg/Nm3; the exhaust volume is smaller than 100 Nm3/min, the standards will be 150mg/Nm3. (based on Korea’s guideline)

Stationary Pollutant Emission Standard,SOx,NOx,TSP